home *** CD-ROM | disk | FTP | other *** search
- Path: arlut.utexas.edu!khan!jerry
- From: jerry@arlut.utexas.edu (Jerry Heyman)
- Newsgroups: comp.sys.amiga.misc
- Subject: Please help - A3000, A2410, EGS 6.2
- Date: 31 Jan 1996 21:46:55 GMT
- Organization: UT Applied Research Laboratories
- Message-ID: <4eoo0f$k53@ns1.arlut.utexas.edu>
- NNTP-Posting-Host: khan.arlut.utexas.edu
- X-Newsreader: TIN [version 1.2 PL2]
-
- [ Article crossposted from comp.sys.amiga.hardware ]
- [ Author was Jerry Heyman ]
- [ Posted on 31 Jan 1996 15:10:59 GMT ]
-
- Let me preface this by saying that I've also crossposted to c.s.a.graphics
-
- I just recently purchased an A2410 on comp.sys.amiga.marketplace and received
- it along with EGS 6.2 software.
-
- Board installed wonderfully and after installing the EGS Software (and the
- A2410 driver), I'm stuck.
-
- When the monitor is plugged into the A2410 card, I boot and get the royal
- blue EGS Tiga screen. But no more than that.
-
- I disconnect the monitor and hook it back to the A3000 built-in VGA port
- and immediately see -
-
- popup that says: NO LEGS installed
-
- Followed by another popup that says that intuition is trying to restart
- and I should close down any open windows. On the cli window that opens
- as s:startup-sequence and s:user-startup output is written, I get the
- following:
-
- Error: unknown video node in LINK: LEGSa:mux2video LEGSa.monitor
-
- Since the documentation is real sparse, I was hoping that this information
- might trigger a/some idea(s).
-
- My system is:
-
- A3000/16 w/10MB
- AmigaDOS 3.1
- MagicWB 2.0
- MUI 3.1
- A2410 Tiga board
-
- jerry
- --
- Jerry Heyman | jerry@arlut.utexas.edu
- Tactical Simulation Division | http://www.arlut.utexas.edu/~jerry/main.html
- Applied Research Laboratories of UT Austin | "Software is the difference
- P.O. Box 8029, Austin, TX 78713-8029 | between hardware and reality"
-